1" - 2.1" Archives - Boat Service Estonia

RAM® Universal Marine Electronic Mount with Diamond Base

Jaan — Fri, 06 Sep 2024 13:00:26 +0000

The RAM-B-111-238U consists of a double socket arm, 2.43″ x 1.31″ diamond base and 6.25″ x 2″ rectangle base. The diamond base contains two holes 1.912″ from center to center, positioned at both ends of the base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.

Sobitub mudelitele: Garmin GPSMAP 162, Garmin GPSMAP 168, Garmin GPSMAP 175, Garmin GPSMAP 180, Garmin GPSMAP 180C, Garmin GPSMAP 182, Garmin GPSMAP 185, Garmin GPSMAP 188, Garmin GPSMAP 232, Garmin GPSMAP 238, Garmin Striker 5 Series, Garmin Striker Plus 5cv, Garmin Striker Vivid 5cv

The post RAM® Universal Marine Electronic Mount with Diamond Base appeared first on Boat Service Estonia.

RAM® Trolling Motor Stabilizer with Strap Hose Clamp – Short

Jaan — Fri, 06 Sep 2024 12:58:45 +0000

The RAM-108-BU consists of a adjustable strap clamp base, short double socket arm and 2.5″ diameter round base that contains the universal AMPs hole pattern. The strap will accommodate rails from 1″ to 2.1″ in diameter. Included is a rubber protection strip to help reduce vibration and to prevent scratching of the mounting surface.

The post RAM® Trolling Motor Stabilizer with Strap Hose Clamp – Short appeared first on Boat Service Estonia.

RAM® Trolling Motor Stabilizer with Strap Hose Clamp – Long

Jaan — Fri, 06 Sep 2024 12:58:45 +0000

The RAM-108-DU consists of a LONG length double socket arm, 2.5″ diameter round base that contains the universal AMPs hole pattern and single strap base. The strap will accommodate rails from 1″ to 2.1″ in diameter. The trolling motor stabilizer will take every bit of the vibration out of your trolling motor while all the time protecting the head, shaft and mount from damage. A must for any angler with a bow mount trolling motor.

The post RAM® Trolling Motor Stabilizer with Strap Hose Clamp – Long appeared first on Boat Service Estonia.

RAM® Trolling Motor Stabilizer with Strap Hose Clamp – Medium

Jaan — Fri, 06 Sep 2024 12:58:45 +0000

A must for any angler with a bow mount trolling motor, the RAM-108U trolling motor stabilizer consists of a C size 1.5″ medium length double socket arm, 2.5″ diameter round base that contains the universal AMPS hole pattern, strap hose clamp base, and drill-down 1.5″ round plate with C size ball. The strap accommodates rails from 1″ to 2.1″ in diameter. The trolling motor stabilizer takes the vibration out of your trolling motor while protecting the trolling motor and mounting surface from damage. The maximum allowable distance between the mounting surface on the boat and the lowest point of the trolling motor shaft is 8.75.

Trolling motor stabilizer mount protects the trolling motor and mounting surface from damage; strap hose clamp compatible with rails from 1″ to 2.1″ in diameter, Includes strap hose clamp base with C size 1.5″ rubber ball, medium length C size double socket arm, and 2.5″ round plate with C size 1.5″ rubber ball, Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments, Backed by a lifetime warranty

The post RAM® Trolling Motor Stabilizer with Strap Hose Clamp – Medium appeared first on Boat Service Estonia.